Michigan Locations
Wisconsin Location
Colorado Location
Ohio Locations
Indiana Locations
Kentucky Location

Elizabethtown PH: 270.900.4732

  • Facebook Social Icon
  • Twitter Social Icon
  • LinkedIn Social Icon

Copyright 2018 Onecranesource all rights reserved designed and developed by Matthew Faulkner

Gorbel Fall Protection

We are proud to offer the Gorbel Tether Track™ Fall Protection Systems utilizing rigid rail for fall arrest applications.

A Fall Arrest System is an active means of protecting workers from injury due to falls. A complete personal fall arrest system includes an anchor, a body harness and a connector such as a shock-absorbing fall arrest lanyard or self-retracting lanyard (SRL).

Unlike wire rope systems, Gorbel Tether Track™ Fall Arrest systems deliver shorter free fall distances, reduced risk of secondary fall injuries and an uninterrupted experience for a second worker in the event of a fall.

Using a Gorbel Tether Track™ Rigid Rail Fall Arrest System as your anchor provides workers with a high degree of mobility and freedom, while preventing falls to lower levels. Gorbel Tether Track™ Rigid Rail Fall Arrest Systems provide a reliable and cost-effective solution for reducing the risk of injury in elevated work environments. Available in various configurations, including multiple track profiles and support center distances, fall protection can be easily customized to fit every budget and application, and are designed by qualified engineers to meet OSHA standards.

Gorbel Tether Track™ Fall Arrest Systems
Bridge System

» Consists of two runways and a traveling bridge for maximum coverage within a rectangular work area

» Lightweight aluminum bridge follows the worker, remaining directly overhead

» Available in ceiling mounted or free standing designs

» Plain or trussed track runways based on support center requirements

» Unlimited runway lengths, with up to 18’ bridge spans

» Systems are designed for workers up to 310 lbs. with tools when used with 900LB Maximum Arresting Force (MAF) energy absorbing lanyards, properly rated full-body harnesses and a connecting device

» Multiple bridges can support several workers when properly zoned

Ceiling—Mounted Monorail System

» Provides mobility along a single axis for applications when workers need to travel in a straight line

» Curved track sections available

» Variety of hanger options available to accommodate various building structures

» Unlimited monorail lengths with up to 50’ between supports (dual trussed track only)

» Systems are designed for workers up to 310lbs with tools when used with 900LB Maximum Arresting Force (MAF) energy absorbing lanyards, properly rated full-body harnesses and connecting device

» Track can accommodate single or multiple workers, dual bypassing track allows workers to safely pass each other without disconnecting

Fold—Away System

» Provides mobility along a single axis for applications when workers need to travel in a straight line

» Curved track sections available

» Variety of hanger options available to accommodate various building structures

» Unlimited monorail lengths with up to 50’ between supports (dual trussed track only)

» Systems are designed for workers up to 310lbs with tools when used with 900LB Maximum Arresting Force (MAF) energy absorbing lanyards, properly rated full-body harnesses and connecting device

» Track can accommodate single or multiple workers, dual bypassing track allows workers to safely pass each other without disconnecting

Free‐Standing Monorail System

» Free-standing support when structure is inadequate for ceiling mounted applications

» Available in free-standing cantilevered or goal post designs. Special finishes available

» Cantilevered for fewer support columns. Accommodates headroom constraints

» Goal Post design can be bolted directly into concrete floor. No costly foundations!

» Standard support centers from 16’ to 35’, and up to 50’ custom designed (dual trussed track only)

» Systems designed for workers up to 310lbs with tools when used with 900LB Maximum Arresting Force (MAF) energy absorbing lanyards, properly rated full-body harnesses and connecting device

» Accommodate single or multiple workers. Track allows workers to safely pass each other without disconnecting

Single Pole System

» Space-saving design allows for installation in areas where there is minimal floor space or limited room for foundations

» Utilizes only one free-standing support with one single foundation

» Standard track lengths up to 53’

» Systems are designed for workers up to 310lbs with tools when used with 900LB Maximum Arresting Force (MAF) energy absorbing lanyards, properly rated full-body harnesses and a connecting device

» Track can accommodate single or multiple workers, dual bypassing track allows workers to safely pass each other without disconnecting

» Special finishes available based on application requirements

Swing—Arm System

» Provides circular or semicircular fall protection. Compact footprint

» Versatile and adaptable. Swing arm can be positioned over the work space or moved out of the way when not in use

» Wall-mounted, column-mounted or free-standing designs

» Available in wall cantilever or wall bracket config., depending on headroom constraints

» Infinitely variable friction brake or motorized rotation available

» Standard arm lengths from 8’ to 30’, custom spans available upon request

» Systems designed for workers up to 310lbs with tools. Standard design is to the latest lanyard standards of 900lb Maximum Average Arresting Force (MAAF) with a 1800lb Maximum Arresting Force (MAF)

» Accommodates single or multiple workers, dual bypassing track allows workers to safely pass without disconnecting

Ranger Fall Protection System

The versatile Road Ranger Mobile Anchor provides the necessary anchorage point right where you need it, indoors or out and is rated for highway towing up to 65 MPH. 

Perfect for use when maintaining aircraft, railroad cars, industrial equipment, or heavy machinery. The Road Ranger's sleek, balanced design allows for easy highway towing and transport around the job site. 

» Maximum towing speed 65mph
» Adjustable height 2-in. ball coupler attaches to trucks, or related towing devices
» Weight 3,120 lbs.
» Adjustable anchor height at 18, 20, and 22 ft.
» Max. capacity 310 pounds
» Indoor/outdoor use
» Integral outriggers provide firm support
» Permits a 30 degree work area from anchor point
» Dimensions when towed: Length 16'2", Height 6'7", width 6'3"
» Dimensions in use: Length 15' (excluding reach), Width of unit with outriggers extended 11'11"